.299 7.59 .262 6.65 .591 15.01 ( 1.372 ) 34.85 when assembled .210 5.33 .150 3.81 see note 8 mrking: kings + 2065 + cable code + date code + location code .354 8.99 .138 3.51 .748 19.00 catalog p/n:2065-e00-4cf01n notes: unless otherwise specified 1. for general series specifications, see sdprf-206. 2. material specifications: bayonet sleeve, body, contact, ferrule: brass per astm b16 insulator: teflon per astm d1710 spring washer, outer contact: beryllium copper, astm-b-194 gasket: silicone rubber 3. finish specifications: bayonet sleeve, body, ferrule: .000100min nickel per ams-qq-n-290 over copper flash per astm b734 (rohs) contact: .000030 min. gold per astm b488, over nickel per ams-qq-n-290 (rohs) all other metal parts: .000050 min nickel per ams-qq-n290 over .000050 min copper per astm b734 (rohs) 4. contact and ferrule shipped loose. 5. for use with tachii cable tcx-4cfb or equivalent . 6. for crimping use kth-5000 and kth-5016 (.255 hex, .054 square flat ). 7. assemble to cable using cap-e01. 8. these area have white marking. 9. electric specifications: impedance: 75 ohms frequency range: dc to 3 ghz return loss: 26.5 db min (dc to 2.4 ghz) 21 db min (dc to 3 ghz) recommended cable trimming dimensions a bnc 75 ohm plug for tcx-4cfb or equivalent (rohs compliant) ctc cy 12/21/09 by date appd revised per ecr-er21004 description d rev xx/xx/xx xxx date approved xx/xx/xx xxx date approved 09/26/08 dcam date approved 09/23/08 cy date drawn customer sales drawing per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: decimal: .xx [x.x] .01 [0.3] .xxx [x.xx] .005 [0.13] .xxxx [x.xxx] .xxxx angles: 2 scale: 2:1 sht rev of d 1 1 SD2065-E00-4CF01N winchester electronics corporation 62 barnes industrial road north wallingford, connecticut 06492 third angle dmf026 b
|
